Shopbewertung - PayPal LogoMitglied im Händlerbund
Deutsch English

Delivery times are only valid if deliveries are made on time by the relevant manufacturer!

business vacation
from 23.12.2021 to 02.01.2022

Phoenix Sunclix Photovoltaic Cable Coupler Male 6,0-16,0mm² (-)

Phoenix Sunclix Photovoltaic Cable Coupler Male 6,0-16,0mm² (-)
For a larger view click on the thumbnail
Product no.: PV-CM-S6-16
Shipping time: 2-9 days
Manufacturer: Phoenix Contact
More products of: Phoenix Contact
from 1 pcs.per 6,46 EUR
from 10 pcs.per 5,57 EUR
from 25 pcs.per 5,04 EUR
19 % VAT plus. excl. Shipping costs
Add to cart

  • Details
  • More images

Products description

Photovoltaic Coupler
nominal current: 50 A (10mm²) up to 65A (16,0mm²
housing inclusive contact for wire gauge 6,0mm² - 16,0mm²
nominal voltage: 1500 V
Connection type: Sunclix spring

Phoenix article No.: 1790797

Connecting the cable (Fig. 1 )

  • Strip the cable with a suitable tool by 15 mm.
    Make sure that no individual wires are cut off.
  • Carefully insert the stripped wire with twisted litz wires all the way in.
    The litz wire ends have to be visible in the spring.
  • Close the spring. Make sure that the spring is snapped in.
  • Push the insert into the sleeve.
  • Tighten the cable gland to 2 Nm.
  • Bring the plug and the socket together.
    The connection snaps close thereby.
  • Pull on the coupling to check the proper connection.

Separating the connector (Fig. 2)

  • You need a slot screwdriver with a 3-mm wide blade
  • Insert the screwdriver as shown in Fig.  2 .
  • Leave screwdriver inserted and disconnect the plug and the socket from each other.

Loosen the cable (Fig 3)

  • Screw open the cable gland.
  • Insert the screwdriver as shown in Fig.  3.
  • Pry the connection open and pull the sleeve and the insert apart.
  • Open the spring with the screwdriver. Remove the cable.

This Product was added to our catalogue on 11/10/2013.